Screw Material: 316 Stainless Steel

M4/M6 set screws and hex socket head cap screws with vent holes

Can be directly applied in a vacuum environment of 10^(-6) Torr (approximately 10^-4 Pa) at 23°C

Outer diameter Ø25 mm extension rod, multiple lengths available, M4 thread on top, M6 thread on bottom

Gap-free pressure block with 3-point contact, flexible clamping, reversible symmetrical design, supports left and right-hand installation

Heat-treated, stress-relieved stainless steel material with high stability

Outer diameter Ø12.7 mm extension rod, multiple lengths available, M4 thread on top, M6 thread on bottom

Zero-clearance pressure block with 3-point contact, flexible clamping, reversible symmetrical design, supports left and right-hand installation

Heat-treated, stress-relieved stainless steel material with high stability

Made of heat-treated 316L stainless steel with low thermal expansion coefficient

Optical components secured by flexible spring plates and fixing screws

Directly applicable in vacuum environments of 10^(-6)Torr (approximately 10^-4Pa) at 23℃

Directly applicable in a vacuum environment of 10^(-6) Torr (approximately 10^-4 Pa) at 23°C

After baking at 110°C for 5 hours, suitable for vacuum environments of 10^(-9) Torr (approximately 10^-7 Pa) at 23°C

Features low thermal drift and thermal displacement

Directly applicable in a vacuum environment of 10^(-6) Torr (approximately 10^-4 Pa) at 23°C

After baking at 110°C for 5 hours, suitable for vacuum environments of 10^(-9) Torr (approximately 10^-7 Pa) at 23°C

Features low thermal drift and thermal displacement

Directly applicable in a vacuum environment of 10^(-6) Torr (approximately 10^-4 Pa) at 23°C

After baking at 110°C for 5 hours, suitable for vacuum environments of 10^(-9) Torr (approximately 10^-7 Pa) at 23°C

Features low thermal drift and thermal displacement