The kit contains a complete set of polishing tools, including an FC/PC connector polishing disc, an FC/APC connector polishing disc, a 30 ml dropper bottle for distilled water, a 30 ml dropper bottle for isopropyl alcohol, a cassette-type optical fiber cleaner (replaceable inner cartridge), 1 µm diamond polishing film (5-pack), 0.01 µm final polishing film (5-pack), and one polishing pad: size 22.2 cm x 16.5 cm. All of these are packed in a carrying case. It is strongly recommended to purchase the Lubang handheld optical fiber end-face inspection scope WL-D200 to observe the polishing status in real time during the polishing process, avoiding over-polishing and other situations.

LBTEK Fiber Optic Polishing (Lapping) Films come in 5 types, all with a standard size of 152 mm × 152 mm. For fiber optic polishing, a five-step polishing process is recommended: the first four steps use diamond lapping films with particle sizes of 30 µm, 6 µm, 3 µm, and 1 µm respectively, while the fifth step employs a silica film with a particle size of 0.02 µm. Distilled water should be applied to the film, and an appropriate polishing pad should be selected to perform figure-8 motion polishing. The silica film is manufactured by coating high-precision silica particles, featuring a highly smooth surface with minimal scratches, and it does not contaminate optical fibers during the polishing process.

LBTEK fiber optic polishing pads are often used together with fiber optic patch cords, polishing discs, and polishing paper. They feature both glossy and matte surfaces for securing fiber optic polishing paper. During use, place the glossy side of the polishing paper onto the glossy side of the pad. The mutual friction between the two effectively prevents the paper from slipping, making it easier to move the fiber optic connector on the paper to achieve a polishing effect.

LBTEK's glass polishing plate needs to be used together with an optical fiber polishing pad. Place the optical fiber polishing pad on the glass polishing plate, and use it with abrasive paper. During the polishing process, this optical fiber polishing pad can maintain the shape of the optical fiber connector tip, avoiding damage to the connector shape.