The LBTEK snap-in 30mm coaxial system mounting bracket is designed to support pre-assembled coaxial systems (subsystems), allowing the coaxial system rod to be snapped into the bracket without disassembling the coaxial system. It features side-mounted M2.5 (compatible with 2mm hex wrench) socket head cap screws for secure installation, with a flexible structural design to ensure firm clamping. The center includes an M4 countersunk hole for connecting optical rods.

The 30 mm coaxial plate mount provided by LBTEK features two M6 slotted holes and one M4 countersunk slotted hole, designed for directly securing 30 mm coaxial plates to optical tables or breadboards. Purchasing the LBTEK OPMB1 right-angle adapter plate includes two M6 hex socket head cap screws with M6 washers, as well as one M4 hex socket head cap screw.

The coaxial-post adapter provided by LBTEK can clamp standard Ø12.7 mm posts. The grooves on the inner wall of the adapter's base form a dual-line contact with the post. The side features an M6 spring-loaded knurled hex thumbscrew for locking, which can be reinforced with a 5 mm hex wrench (Note: Excessive torque may cause the locking screw to break. It is recommended to use an L-shaped hex wrench and gently tighten by holding the short end). It is also compatible with 30 mm coaxial systems and can accommodate Ø25.4 mm optical components. For height adjustment, the mount base has a through-hole, allowing the post to pass completely through to the bottom for adjusting component height.

The Ø6 mm post 90-degree clamp provided by LBTEK features a robust construction with an M3 threaded hole and a Ø6 mm through hole, allowing Ø6 mm posts to be securely fixed at 90 degrees to each other. This enables stable and compact assembly of complex accessories, thereby improving space utilization. The clamp includes an M3 set screw on the side, which can be tightened using a 1.5 mm wrench.

The coaxial plate positioner provided by LBTEK can be used to record the position of coaxial plates, facilitating movement and repositioning within coaxial systems. The positioner has a thickness of 3.5 mm and is compatible with both 30 mm and 60 mm coaxial systems. It employs a flexible clamping mechanism, tightened with a 1.5 mm hex wrench, and does not require disassembly of other components during installation.