LBTEK 0.5-inch stainless steel mirror mount, equipped with two vertical drive adjusters with locking rings, for mounting 12.7 mm optical components. Suitable for situations where space behind the mount is limited and horizontal adjusters cannot be used. Optical components are secured by flexure clips and fixing screws. Two knobless M4×0.20 precision adjusters (with locking rings) provide ±4° angular adjustment, operated with a hex key.
      MT-AM05S5 mounting holes are two M4 counterbores; MT-AM05S5A has one M4 threaded hole and one M4 counterbore. The front and back plate connecting block of MT-AM05S5A is made of 316L stainless steel (MT-AM05S5 is made of copper), offering better corrosion resistance and outgassing characteristics, with a lighter adjustment feel for fine tuning. The adjuster ends feature a limiting structure to prevent the locking ring from unscrewing and falling off.

LBTEK stainless steel mount is used for installing Ø12 mm collimators, featuring 2 M4×0.2 precision adjusters without knobs but with locking nuts. The locking nuts are 6 mm hex nuts, adjustable with the MT-TW6 torque wrench. The collimator is secured by flexible spring plates and set screws. The 2 M4×0.2 precision adjusters without knobs but with locking nuts allow for pitch and yaw adjustment of the collimator using a hex key. The optical mount has M4 countersunk mounting holes on the side. The purchase of the LBTEK stainless steel mount includes hex socket ultra-thin head screws and a hex key.

LBTEK provides Hex-Key Adjustment Thumb Screws that allow quick adjustment of hex actuators, cap screws, and set screws. Unlike balldriver, they can remain in the hex socket of the screw during adjustment, enhancing convenience. Each size is sold in a set of four thumb screws. Additionally, a kit containing one of each size is also available.

The MT-OWR1 Lock Ring Wrench provided by LBTEK is specifically designed for adjusting the lock rings of MT-AM1S5 stainless steel mirror mounts. It features a dual-wrench-head design, allowing the lock ring adjustment and the threaded pair to be aligned in the same line. The Ø3 mm through-hole at the center of the wrench head enables a 2 mm hex key to pass through the wrench, facilitating simultaneous adjustment of the threaded pair while adjusting the lock ring.