Adhesive-mounted platform mounting base

Specifications
Feedback
Product Description
  • Can be equipped with a beamsplitter cube or Right-Angle Prisms
  • 5 mounting dimensions available, and the Optical Axis center height is an integer.
  • Compact Structure, low-profile design, adhesive-retained optical components
LBTEK Adhesive Platform Mounts are used to mount beamsplitter cubes or Right-Angle Prisms and are available in multiple specifications: 5 mm, 10 mm, 12.7 mm, 20 mm, and 25.4 mm. The Adhesive Platform Mounts are used to mount beamsplitter cubes and Right-Angle Prisms and feature a Compact Structure. They secure Optical Components by adhesive bonding. The Optical Axis center height is an integer. The bottom of each mount has M4 threaded holes for mounting Mounting Posts. Note: The small white dot on the lower-left surface of the mount indicates that the two nearest right-angle edges are the reference edges for adhesive bonding (if the Optical Components are not bonded against these two reference edges, their center will not be at the geometric center of the mount). The circular hole at the bottom inside the groove of the mount is an adhesive dispensing process hole (black silicone rubber is recommended for mounting Optical Components).
Attributes
Material6061-T6 Aluminum alloy
Surface treatmentBlack Anodized
Optical component mounting methodAdhesive retention
Adhesive Platform Mounting Base
  • Adhesively secured optical components
  • The bottom features tapped holes and can be mounted onto mounting posts.
  • 5 installation sizes available

LBTEK Adhesive-Mounted Platform Mounts are used to mount beamsplitter cubes or Right-Angle Prisms, PCMG5M, PCMG10M, PCMG05, PCMG20M, PCMG1. They adhesively secure Optical Components, and the Optical Axis center height is an integer; they are respectively suitable for mounting Optical Components with Edge Lengths of 5 mm, 10 mm, 12.7 mm, 20 mm, and 25.4 mm; the bottoms of all 5 mounts have M4 Tapped Holes and can directly be compatible with Mounting Posts with M4 top holes; Note: The small white dot on the lower-left surface of the mount indicates that the two nearest right-angle edges are the adhesive datum edges to align against (if adhesive bonding is not performed against these two datum edges, the center of the optical component will not be at the geometric center of the mount). The bottom circular hole in the recess of the mount is a process hole for adhesive dispensing (it is recommended to use black Silicon(Si) rubber to bond Optical Components).

Application Diagram

Product Model
Applicable optical component size
Optical axis center height
File
Unit Price
Compare
Lead Time
PCMG5M New5 mm10 mm
$14.94today
Add Cart
PCMG10M New10 mm15 mm
$17.82today
Add Cart
PCMG05 New12.7 mm15 mm
$18.36today
Add Cart
PCMG20M New20 mm20 mm
$23.02today
Add Cart
PCMG1 New25.4 mm25 mm
$23.57today
Add Cart