The magnetic quick-release translation mount provided by LBTEK consists of two parts: an XY translation mount and a magnetic quick-release plate. When used alone as an XY mount, its functionality is the same as that of TXY1 and TXY1S. When used together with the magnetic coaxial quick-release plate, the included SM1R retaining ring can secure optical components with a maximum thickness of 10 mm and a diameter of Ø25.4 mm into the SM1 internal thread of the quick-release plate, enabling rapid removal of optical components within the coaxial system. The mount base features laser-printed vertical and horizontal scale markings to assist in aligning the magnetic quick-release plate. Additionally, both parts of the mount have laser-printed alignment marks to indicate the correct orientation for installing the quick-release plate. The side of the magnetic quick-release plate includes a blank area for marking the optical component installed in the TXY1QF, facilitating differentiation of optical components among multiple quick-release plates. Additional quick-release mounting plates can also be purchased separately.

The STXY1-A/S/D models are all equipped with two adjusters, driven by a threaded pair/micrometer head/differential head respectively. The differential drive head consists of two internal lead screws for differential drive; one advances the spindle with a precision of 500 µm per revolution, while the other retracts it with a precision of 450 µm per revolution. Therefore, one full rotation of the graduated knob results in a total spindle displacement of only 50 µm, enabling precise positioning. During fine adjustment with the differential head, coarse adjustment can be locked using a hand-tightened nut. Suitable for mounting Ø25.4 mm optical elements, it allows fine-tuning of the optical element position in the X and Y directions with a travel range of ±3 mm. The XY translation module features an SM1 internal thread and includes two SM1R retaining rings for mounting optical elements with a maximum thickness of 12.2 mm. It is compatible with Ø25.4 mm lens tubes. The front panel center has an SM1 internal thread, compatible with Ø25.4 mm lens tubes. This mount has three M4 threaded holes, allowing direct mounting onto optical posts, and is also compatible with 30 mm cage systems. The XY translation mount stage dimensions are 66×66 mm. Note: The STXY1-S drive method is micrometer head drive. Due to manufacturing tolerances in the micrometer head, there may be deviations in the XY travel range of the mount.

The TXYR1 features two adjusters that allow for fine-tuning of the optical component position in the X and Y directions, with a travel range of ±2 mm. The XY translation module is equipped with SM1 internal threads and includes an SM1R retaining ring for securely mounting optical components with a maximum thickness of 20.5 mm and a diameter of Ø25.4 mm. The back of the TXYR1 has SM2 internal threads, enabling the installation of SM2 lens tubes or SM2 series adapters. Additionally, the XY translation rotation mount can rotate 360° with a scale accuracy of 1° and indicator lines spaced at 1 mm intervals. The TXYR1 can be mounted in a 60 mm coaxial system, with set screws on all sides for securing Ø6 mm coaxial system mounting rods. Furthermore, the TXYR1 has M6 threaded mounting holes on both the bottom and sides, with three threaded holes spaced 25 mm apart on the bottom edge for connecting optical posts.

The TXY2 features two adjusters that allow fine-tuning of the optical component position in the X and Y directions, with a travel range of ±2 mm. The XY movement module comes with SM2 internal threads and includes an SM2R retaining ring for securely mounting optical components with a maximum thickness of 15.5 mm and a diameter of Ø50.8 mm. It can accommodate SM2 lens tubes or SM2 series adapters. Additionally, the TXY2 can be installed in a 60 mm coaxial system, with set screws on all sides for securing Ø6 mm coaxial system mounting rods. Furthermore, the TXY2 has M6 threaded mounting holes on both the bottom and sides, with three threaded holes spaced 25 mm apart on the bottom edge for connecting optical posts.

LBTEK's 16 mm coaxial system XY displacement stage provides ±1.0 mm travel perpendicular to the optical axis of the 16 mm coaxial system. It features two adjusters, with a fine adjustment precision of 0.25 mm/revolution in the X and Y axes. The front and rear plates of the stage are stationary, while the stage itself can move along the X and Y directions. The XY movement module includes an SM05 internal thread and comes with an SM05R retaining ring for securely mounting optical components with a maximum thickness of 5.8 mm. Both the non-movable front and rear plates of the stage are compatible with 0.5-inch lens tubes for photosensitive applications.

The LBTEK XY Slide Positioner is used for coarse positioning of optical components in the XY direction within a 30 mm coaxial system. It is designed for manual adjustment only and is recommended for use with alignment lasers to monitor centering. The front plate can be secured relative to the rear plate using two locking screws. The central SM1 internal threaded hole can secure optical components up to 8.6 mm thick with a diameter of Φ 25.4 mm, or it can directly mount SM1 external threaded components. The four through-holes on the back plate feature side-locking set screws to secure four Φ 6 mm coaxial rods, making it compatible with our 16 mm coaxial system.