LBTEK platform adjustment mounts are suitable for mounting prisms, cubes, and other optical components. Equipped with 2 adjusters, they provide ±4° pitch/yaw adjustment. The stage size is 25 mm × 25 mm, with the entire moving plate serving as the loading surface. Users can utilize the M3/M4 mounting holes provided on the stage surface to install components requiring adjustment, or directly glue the components to be adjusted onto the moving plate for angle adjustment. Threaded holes are provided on both the side and bottom of the mount platform for fixing the adjustment mount.

The LBTEK Platform Mount is suitable for optical components such as prisms and cubes. It features 3 adjusters that enable ±4° pitch/yaw adjustment. The table size is 49 mm × 49 mm with 10 M4 through-holes, allowing it to be used with the adjustable clamping arm CA-1 to hold optical components with a maximum height of 24.7 mm. The mount platform is connected to the back plate with four M3×8 hex socket head cap screws, and two M4 countersunk holes on the side can be used to secure the mount.

The LBTEK 2D Adjustable Mounting Platform is suitable for mounting optical components such as prisms and cubes. It comes with 2 adjusters, a platform size of 49 mm × 49 mm, and includes an adjustable pressure arm CA-1 (available for separate purchase), capable of clamping optical components with a maximum height of 26mm.

The LBTEK Clamping Arm Height Extension Post can be threaded onto the clamping arm to increase the height. It comes in three models: CA-1E, CA-2E, and CA-3E, with lengths of 31.5 mm, 50 mm, and 71 mm respectively.

LBTEK Height-Adjustable Clamping Arm is used to press cubic optical components onto the platform, featuring an M4 mounting stud at the bottom. The clamping height options are 24.7 mm, 40 mm, and 60 mm.