LBTEK Type A Precision Optical Mount with internal threaded through-hole, which secures optical components using two retaining rings. The bottom of the mount is equipped with either an M4 tapped hole or a countersunk hole for M4 screws, allowing for left or right-handed installation to connect to optical posts. All Type A Precision Optical Mounts feature dual retaining rings for securing optical components. The maximum thicknesses of optical components that can be accommodated by AMM3-05A, AMM3-1A, AMM3-1.5A, and AMM3-2A are 3.8 mm, 4.0 mm, 6.5 mm, and 5.2 mm, respectively. The AMM3-05A comes with three M5X025-22KLB precision adjustment screw pairs, while the AMM3-1A, AMM3-1.5A, and AMM3-2A each include three M6X025-22KLB precision adjustment screw thread pairs. All threaded bushings feature a flexure clamp mechanism, and the locking screws can be secured using a 2.0 mm hex key. Purchasing an LBTEK Precision Optical Mount includes one 2.0 mm hex key. Additionally, the 1-inch, 1.5-inch, and 2-inch series come with two extra M4 socket head cap screw..

LBTEK Type B Precision Optical Mount, smooth bores, no knobs, uses set screws to secure optical components. The bottom of the mount is equipped with M4 tapped holes or countersunk holes for M4 screws to connect with optical posts. Type B precision optical mounts all use rubber-tipped screws to secure optical components, with minimum applicable optical component thicknesses of 2.0 mm, 3.0 mm, and 4 mm respectively. The AMM3-11BS, AMM3-05B, and AMM3-05BS models each come with 3 M5X025-22KLB precision adjustment threaded pairs, while the AMM3-1B, AMM3-1.5B, and AMM3-2B models each come with 3 M6X025-22KLB precision adjustment threaded pairs. All threaded bushings feature a flexure clamp mechanism with clamping screws that can be secured using a 2.0 mm hex key. The AMM3-11BS and AMM3-05BS models without knobs are suitable for compact space. Purchasing LBTEK precision optical mounts includes one free 2.0 mm hex key, with the 1-inch, 1.5-inch, and 2-inch series additionally including 2 M4 socket head cap screws.

The LBTEK Rectangular Precision Optical Mount utilizes adjustment screws to press the flexure clamp against the optical component, securely holding optical components. It is commonly used for mounting rectangular optical components with dimensions of 25.4 mm × 25.4 mm, and can accommodate optical components with a minimum thickness of 3.0 mm. The mount offers an angular adjustment range of ±4° and can be installed in either left-handed or right-handed. The S-type precision optical mount adjusts the angle through three M6×0.25 precision threaded pairs (with locking function). The mount is equipped with three M6×0.25-22KLB precision threaded pairs, where the threaded bushing features a flexure clamp mechanism. The locking screw can be secured using a 2.0 mm hex key. Purchasing the LBTEK Rectangular Precision Optical Mount includes one 2.0 mm hex key and two M4 socket head cap screw.

The LBTEK Standard 3-Axis O-Type Optical Mount is for optical components with a diameter of Ø30.0 mm and an optical axis height of 25.4 mm. The base of the mount features counterbore holes for M4 screws to connect mounting rods. The AMM3-30B model uses set screws to secure optical components, suitable for components with a diameter of 30.0 mm and a minimum thickness of 3.0 mm. The AMM3-30BP1 and AMM3-30BP2 models employ a dual clamping mechanism combining set screws with elastic retaining rings. The set screws can secure components with a minimum thickness of 3 mm, while the dual clamping rings accommodate thicknesses of 6.5 mm and 5.0 mm respectively. The mount is equipped with three M6×0.25 precision adjusters that can be locked with locknuts, providing pitch and yaw adjustment ranges of ±4° with 0.4° per revolution. The adjusters do not include knobs and can be operated using a 2.0 mm hex wrench or a knurled hex wrench (HWS-2). Purchasing LBTEK Standard 3-Axis O-Type Optical Mount includes one 2.0 mm hex wrench and two M4 socket head cap screws as complimentary accessories.

The LBTEK Standard O-Type Optical Mount AMM3-1BP uses both set screws and an elastic retaining ring for dual clamping and securing of optical components, with an optical axis height of 25.4 mm. The base of the mount features counterbore holes for M4 screws, used for connecting mounting rods. The mount can accommodate optical components with a diameter of 25.4 mm and a minimum thickness of 3.0 mm. It is equipped with three M6×0.25 precision adjusters that can be locked with locknuts, providing adjustment ranges of ±4° in pitch and yaw, with 0.41° per rotation. The adjusters do not come with knobs but can be adjusted using the included knurled hex wrench HWS-2. Purchasing the LBTEK Standard O-Type Optical Mount includes one knurled hex wrench HWS-2 and two M4 socket head cap screws. The AMMM3-1BP has a short processing cycle, meeting the mass production and rapid delivery requirements. It employs two tension springs with wire diameters of 0.65 mm and two with 0.8 mm, ensuring better stability for the optical mount.