LBTEK offers the Damped Vibration-Isolating Optical Table series. The tabletop is precision-machined and finished with a textured matte finish, ensuring a surface flatness of 0.05–0.10 mm over 600 × 600 mm and a surface roughness of 0.8 μm. The frame is available in four-leg and six-leg configurations depending on the tabletop size, connected by rods to form a rigid structure. The frame supports are fitted with solid rubber damping vibration isolators at the top, which provide inherent damping for effective resonance suppression near the natural frequency. The table delivers good isolation against mid- to high-frequency vibrations, suitable for isolating small and medium-sized equipment and instruments, with an applicable isolation frequency range of 15–200 Hz. The solid rubber damping vibration isolators provide excellent vibration isolation not only in the axial direction but also in the transverse and rotational directions. The internal damping of rubber is much greater than that of metal, providing excellent high-frequency vibration isolation performance. The bottom of the table frame is equipped with integrated leveling feet and casters, meeting the diverse spatial needs of the laboratory. The tabletop consists of a high-permeability stainless steel top plate, an isolation cup layer, a central honeycomb core, and a bottom steel plate—preventing liquids and contaminants from penetrating the honeycomb structure and eliminating gas convection between tapped holes. The frame below the tabletop forms a damping vibration isolation system, effectively attenuating vibrations above the natural frequency.