LBTEK Vertical Adjustment Mirror Mount, designed for mounting optical components with a diameter of 25.4 mm and a maximum thickness of 6.2 mm, secured by a retaining ring. It offers an adjustment range of ±2.5°, with adjustment precision of 0.27°/rotation for pitch and 0.22°/rotation for yaw. Equipped with 2 M5×0.25 adjusters featuring lock nuts, it can be adjusted using the included HWS-2 knurled 2.0 mm hex keyh or a standard 2.0 mm hex key. The vertical adjustment mount features 2 Ø3 mm pin holes, 2 M4 threaded holes, 2 8-32 threaded holes, and 1 countersunk hole for M4 at the base, allowing mounting on posts or various other mounting devices. All the optical axis center height is 25.4 mm.

LBTEK vertical adjustment mount, capable of mounting Optical Components with mounted diameter of 30 mm, 25.4 mm, 50.8 mm, maximum thickness of 5 mm, 8 mm, retaining ring fixes Optical Components; adjustment angle of ±1.2°, ±1.5°; 2 M5×0.25 adjusters both with locking screws, head with knurled knob or without knurled knob, can be manually adjusted or adjusted with hex wrench. The bottom has 2 M3 threaded holes, each of the two sides has 1 M4 or M6 threaded hole and 2 M3 threaded holes, can be mounted on posts or other different mounting devices; note that the optical axis height differs between bottom and side mounting methods; the gimbal adjustment structure ensures that the center position of the Mirror surface will not be changed when adjusting the angle; this product can be used not only for mounting Mirrors, but also for mounting beamsplitters at 45° incidence

The LBTEK Vertical Adjustment Mirror Mounts can accommodate 25.4 mm optical components with a minimum thickness of 2.5 mm, secured by rubber-tipped set screws. It offers an adjustment range of ±3.5°, with adjustment precision of 0.36°/rotation for pitch and 0.37°/rotation for yaw. The mount features two M6×0.25 adjusters with locknuts, which can be adjusted using either the included HWS-2 knurled 2.0 mm hex key or a standard 2.0 mm hex key. Additionally, the vertical adjustment mount is available in two versions: with base and without base. The base-less version has three M4 threaded holes at the bottom for mounting posts, while the base version features M6 through-holes for direct mounting onto breadboards or other surfaces with M6 threaded holes. Note that the optical axis height differs between the base and base-less versions.