LBTEK Optical Fiber Adapter and Interface Cleaner removes dust, particles, and oil from end faces without the need for alcohol or other solvents, avoiding secondary contamination caused by solvent residues while significantly improving cleaning efficiency. A single cleaning takes only a few seconds to complete. The product is comfortable to hold and can be operated with one hand, making it especially suitable for use in confined spaces with limited room, such as inside cabinets or behind panels. The cleaning head effectively removes contaminants without damaging the polished surface of the optical fiber end face. Each cleaning head can perform more than 750 cleaning operations. When the cleaning head reaches the end of its service life, the transparent window turns green to indicate replacement. The product structure is designed with reusability and economy in mind. A single cleaning pen body can replace the cleaning head up to 3 times (a total of 3000+ cleanings), effectively reducing long-term usage costs. It should be noted that the cleaning pen body is not infinitely reusable. After more than 3 replacements, the internal mechanical structure may be damaged due to wear. In this case, it is recommended to replace the entire cleaning pen.

FBCC125 (length 240mm) can clean PC or APC polished 1.25 mm LC and MU adapters and interfaces, while FBCC250 (length 230mm) can clean PC or APC polished 2.5 mm SC, FC, ST, and E2000 adapters and interfaces. For operating instructions, please refer to the technical description label. Note: Do not use this product to clean MU backplane connectors.

LBTEK Optical Fiber Cleaner uses alcohol-free special fiber, which can be used for end-face cleaning of various optical fiber interfaces in optical fiber communication transmission networks.

FCB-M: The cleaning cloth has a total length of 3 meters, and the upper plastic sliding cover can be closed when not in use to protect it from contamination.

FCB-20: A cartridge-type optical fiber cleaner with replaceable inner core, easy to operate, simple to replace, and can be used up to 550+ times.

The LBTEK optical fiber cleaning stick is specifically designed for the ferrule end faces of 2.5mm connectors such as SC, FC, ST. With a rod length of approximately 146mm, it can reach deep into the adapter cavity to clean both male and female end faces. The cleaning medium is made of microfiber fabric, which can dry-wipe to remove dust, and can also be used with an optical fiber cleaning agent for wet wiping to remove stubborn oil stains. It is designed for single use, with each stick used for one cleaning, ensuring effective cleaning results.