
The LBTEK Filter Mounts OT-CF1 and OT-CF2 are designed to hold one or two flat optics. The holding parts feature a nylon coating to prevent damage to the held optics. The OT-CF1 can hold flat optics up to 2 mm thick, while the OT-CF2 can accommodate a single optic up to 2 mm thick or two optics up to 1.5 mm thick on each side. These holders are compatible with various flat optics, including filters and near-infrared detection cards. The center of the mount features an M4 countersunk hole, allowing onto posts or optical platforms using the included M4 hex socket head cap screw. Additionally, the sides of the holder are equipped with two M4 through-holes, which can be used with M4 screws to stack multiple holders together.

Filter Mount Setup IRDC1
Product Model | Clamping method | Maximum applicable thickness of optical components | File | Unit Price | Compare | Lead Time | ||
|---|---|---|---|---|---|---|---|---|
| OT-CF1 | Single-sided | 2.0 mm | $22.20 | today | Add Cart | |||
| OT-CF2 | Single/Double-sided | 1.5 mm/2.0 mm | $33.44 | today | Add Cart |

The LBTEK Compact Filter Mounts OT-CF3 can hold flat optics on both sides. The clips's surfaces are coated with nylon, providing a secure grip while preventing damage to the optics. The mount accommodates flat optics up to 2 mm thick when loaded from one side and up to 1.5 mm thick when loaded from both sides. With its compact size and thin profile, this mount is ideal for space-constrained optical setups. It features a centered M4 tapped hole at the bottom for direct mounting onto optical posts.

Compact Filter Holder Mounting IRDC1
Product Model | Clamping method | Maximum applicable thickness of optical components | File | Unit Price | Compare | Lead Time | ||
|---|---|---|---|---|---|---|---|---|
| OT-CF3 | Single/Double-sided | 1.5 mm/2.0 mm | $17.13 | today | Add Cart |

The Flexure Plate Clamp is a simple, small mount used to clamp flat Optical Components or other thinner components. The plate clamp can hold components with a Thickness between 0.8 mm and 2.3 mm, tightened with thumbscrews on the side of the plate clamp, or by using a 2.5 mm hex to tighten the clamping screw. Although this plate clamp is compatible with many types of Optical Components, such as colored glass filters, neutral density filters, and Test Target, please use caution when installing Optical Components into the plate clamp, because the plate clamp is made of Aluminum, and overtightening can damage the Optical Components.

OT-CF4 Clamping IRDC1 IR Detection Card
Product Model | Outer diameter | Minimum/Maximum Mounting Thickness of Optical Components | File | Unit Price | Compare | Lead Time | ||
|---|---|---|---|---|---|---|---|---|
| OT-CF4 New | 12.7 mm | 0.8 mm/2.3 mm | $23.30 | today | Add Cart |