LBTEK Motorized Vertical Stage is a five-phase stepper-driven Linear Stage, providing precise and stable height adjustment throughout the entire travel range. The motor of the EM-LS90-20CZ stage has a knob at the rear, allowing manual adjustment of the stage height when the controller is not powered. The motor of the EM-HL1623-50CZ stage is equipped with a brake, enabling a locking function when the motor is de-energized to prevent the stage platform from sliding down. The stage platform has M6 threaded holes for mounting optomechanical components; the bottom has M6 counterbore holes, allowing it to be mounted to breadboards, Optical Tables, or other stages using M6 screws. The stage must be used with a Motorized Stage Controller. LBTEK offers the EM-CS5-x series controllers for users to choose from.

Note: Because a brake has been added to the EM-HL1623-50CZ, if the version of the EM-CS5-x controller you purchased cannot properly match the EM-HL1623-50CZ stage, please contact customer service. We will provide a free controller upgrade service.

The five-phase Stepper Motor Stage controller provided by LBTEK is used to control stages that use five-phase Stepper Motors. The controller is available in 1-axis, 2-axis, and 3-axis versions, allowing users to select the appropriate controller based on the number of motion axes in the system. The HDB15 interface on the rear of the controller is used to connect the stage and supports automatic stage identification. Each axis has a set of SMA connectors for input/output signal connections, and the USB Type-B interface is used for driver-free connection to a computer. The controller software provided by LBTEK not only has multiple Motion Control modes to meet general Motion Control requirements, but also adds a high-precision position compensation function and supports multi-language Secondary Development in C/C++, Labview, c#, and python. The 2-axis and 3-axis controllers support arbitrary 2-axis and 3-axis linear interpolation as well as 2-axis circular interpolation.

The EMJC3 joystick controller provided by LBTEK needs to be used in conjunction with our EM-CS series stepper motor stage controllers. It is primarily designed to control the XYZ three axes, with the X-axis defaulting to left-right control, the Y-axis to up-down control, and the Z-axis to clockwise or counterclockwise rotation control. It integrates speed adjustment, stop, and homing functions, supporting emergency stop to return to the zero position. After the EM-CS series stage controller automatically recognizes the default parameters of the stage, the joystick can be plugged in and used immediately without any PC connection or setup, making it convenient and efficient. A 1.5-meter-long USB 3.1 standard Type-A to Type-C data cable is included with the shipment for connecting the joystick controller to the stage controller. When the stage controller is connected to a PC for operation, the controller software has the function to disable simultaneous joystick operation to prevent confusion caused by multi-point control, ensuring safety and reliability.