
The LBC1 visible beam block provided by LBTEK is suitable for wavelengths ranging from 400 nm to 2000 nm and is only applicable to continuous beam. The LBC1 comes pre-installed with one PO-75 post and includes a post installation wrench. Customers can replace it with an optical post featuring a top M4 threaded hole according to their needs. The LBCP2 infrared beam block is suitable for wavelengths from 1 to 12 μm and includes a graphite pad, making it suitable for absorbing both continuous and pulsed laser beams. When using the infrared beam block, the incident aperture can be adjusted by removing its front panel (default size: 50 mm × 50 mm). After removing the front panel with the included 2 mm hex wrench, the aperture can be enlarged to 69 mm × 50 mm. Typically, the front panel serves to protect the graphite pad. Both beam blocks can be mounted on optical posts with top M4 screws for free-space applications, and the infrared beam block is compatible with 60 mm coaxial systems. **Note:** The LBCP2 contains graphite material, which may not be suitable for all laboratory environments. When the beam power exceeds 10 W, the product temperature rises significantly—handle with care to avoid burns. Additionally, if the laser input power exceeds 45 W, the housing temperature may exceed 100 °C. Due to material variations, the performance of individual beam blocks may differ.

Use Ø12.7 mm optical rods to support the infrared beam block
Product Model | Applicable Wavelength | Maximum average power or maximum energy density | File | Unit Price | Compare | Lead Time | ||
|---|---|---|---|---|---|---|---|---|
| LBCP2 | 1-12 μm | 80 W or 25 J/cm2 | $177.34 | today | Add Cart | |||
| LBC1 Upgrade | 400 nm-2000 nm | 10 W | $52.22 | today | Add Cart |

LBTEK's LBCP3 IR beam block is suitable for wavelengths of 1-12 μm, comes with a graphite pad, and can be used to absorb continuous-wave or pulsed laser beams. When using the IR beam block, the Input Aperture can be changed by removing its front panel (size 28 mm × 28 mm; after removing the front panel with a cross wrench, the Input Aperture can be increased to 28 mm × 44 mm). Normally, the front panel can be used to protect the graphite pad. Optical Mounting Posts with an M3 screw on top can be installed at the bottom of the beam block for free space, and the IR beam block is compatible with a 30 mm Cage System. Note: LBCP3 contains graphite material and may not be suitable for all laboratory environments. When the beam power exceeds 10 W, the product temperature is high; be careful of burns when touching the product. In addition, when the laser input power exceeds 40 W, the housing temperature will exceed 100 °C. Due to material differences, the performance of individual beam blocks may vary.

LBCP3 is installed on FPH05-50 and MOP-10
Product Model | Applicable Wavelength | Maximum average power or maximum energy density | File | Unit Price | Compare | Lead Time | ||
|---|---|---|---|---|---|---|---|---|
| LBCP3 New | 1-12 μm | 40 W or 12.5 J/cm2 | $136.78 | today | Add Cart |