LBTEK 2-inch Clear-Edge Stainless Steel Mirror Mount with openings on the mount edges, allowing the beam to reflect from one mount to another at a small incident angle θ; rubber-tipped screws secure the optical component, accommodating optics with a mounting diameter of 50.8 mm and a minimum thickness of 7 mm; M6×0.25 precision adjusters for pitch/yaw adjustment of the optical component, with an adjustment range of ±7°; additionally, the adjusters feature knurled nuts or nuts for locking; the optical mount has M4 countersunk mounting holes on the side, and comes with 2 M4×12 pan head screws and a 2.0 mm hex wrench included with purchase.

LBTEK 2-inch Stainless Steel Mirror Mount for mounting 50.8 mm diameter optical components, featuring flexure pieces and set screws to secure optics with a minimum thickness of 6 mm. The M6×0.25 precision adjuster with side holes is used for adjusting the pitch/yaw of optics, offering multiple adjustment methods as shown in the right figure: Figure 1: Direct adjustment using a 2.0 mm hex key at the end of the adjuster; Figure 2: Adjustment using the MT-SHR1 side-hole adjustment wrench; Figure 3: Mounting of the MT-HWS1 detachable knob for adjustment; Figure 4: Fine adjustment using the HWS-2 hex knob. Additionally, users can add the MT-LN1 adjuster locknut to enhance locking based on requirements. The optical mount features M4 countersunk mounting holes on the side and comes with two M4 thin-head hex screws, one each of 2.0 mm and 2.5 mm hex keys. The MT-AM2S6 includes two locknuts, while the MT-AM2S2 includes three locknuts.

LBTEK 2-inch Stainless Steel Mirror Mounts, with 2 lock rings and vertical drive adjusters, designed for mounting optical components with a diameter of 50.8 mm, suitable for situations where there is no space behind the mount to use horizontal adjusters. The optical component is secured using flexure pieces and set screws. The two M6×0.25 precision adjusters with lock rings (knobless) provide an angular adjustment range of ±4° for the mount. The knobless adjusters are adjusted using a hex key. Additionally, the optical adjustment mount features M4 countersunk mounting holes on the side. The purchase includes 2 M4 thin-head hex socket screws and one each of 2.0 mm and 2.5 mm hex keys.