The SMET-06x series actuators provided by LBTEK have a retracted overall length of 113 mm and can deliver smooth, precise linear motion control. These actuators are driven by a compact two-phase bipolar stepper motor, with a maximum stepping speed of 2 mm/s. The rotating contact structure is eliminated in these actuators, and the top ball head is non-rotatable, which helps reduce wear and friction while enhancing motion smoothness. This series of actuators offers two mounting options: M6×0.25 threaded and Ø8.6 mm smooth-wall configurations.

Note: The electric actuators do not support hot-plugging, as doing so may damage the motor.

The SMET-13x series actuators provided by LBTEK feature a sleek and compact design, with a fully retracted length of 74.6 mm, delivering smooth and precise linear motion control. These actuators are driven by a miniature two-phase bipolar stepper motor, achieving a maximum stepping speed of 2 mm/s. The elimination of the rotary contact structure and the non-rotating top ball head reduce wear and friction, enhancing motion smoothness. When the actuator is not powered, manual adjustment can be performed using the red hand-turning knob located at the rear. This series of actuators offers two mounting options: M6×0.25 threads and an Ø8.6 mm smooth-wall configuration.

Note: The electric actuator does not support hot-plugging, as it may damage the motor. Additionally, rotating the hand-turning knob while the actuator is powered may cause damage to the motor.

The EAC-CV2-1 electric actuator controller provided by LBTEK is a structurally very compact single-axis, two-phase stepper motor controller, primarily used to control the operation of the SMET series electric actuators. It allows selection between trapezoidal and S-shaped speed profiles and features a high theoretical microstepping resolution (49,152 microsteps for motors with 24 full steps and 409,600 microsteps for motors with 200 full steps). The top of the controller is equipped with a digital display and three control buttons, facilitating simple manual operation of the electric actuator. The brightness of the digital display is adjustable and can also be turned off. On the end face of the controller, there are two bidirectional trigger ports with SMA connectors, which can be used to read 5 V external logic signals or output 5 V logic signals to control external devices. Each port can be individually configured.

Note: The electric actuator controller does not support hot-plugging. To disconnect the electric actuator from the controller, please power off the controller first before disconnecting the actuator.