The LBTEK 66 mm Rail Bracket is designed for Ø38 mm dovetail rods with 66 mm dovetail clamps and is compatible with our standard Ø38 mm stainless steel rods. Each bracket includes a locking ring and alignment pin for stable and repeatable positioning. The base can be secured to an optical table or breadboard using M6 socket head cap screws through 4 countersunk holes. Includes 4 M6×16 socket head cap screws.

The LBTEK Solid Stainless Steel Ø38 mm Post comes with a clamping block for 40 mm dovetail rails. This clamping block is secured to the Ø38 mm post using two M6×12 socket head cap screws. The side of the clamping block features a push block designed to hold individual dovetail rails and accessory clamping arms, which can be adjusted and locked using a 3 mm hex key.

The LBTEK Circular Clamping Arm is used for mounting circular slide holders. During use, place the CSS into the Ø110 mm step, then tighten the four clamping plates to secure it. The bottom features a 40 mm dovetail rail, compatible with Ø38 mm dovetail rods. Additionally, the bottom is equipped with M6 threaded holes spaced 25 mm apart, allowing for the installation of other experimental components.

The LBTEK Round Slide Holder is designed for mounting microscope slides in circular clamping arms. The central circular step can accommodate Ø35 mm culture dishes. Featuring a low-profile design, the slide holder reduces the risk of collision with microscope objectives while facilitating easy slide replacement. For custom slide holders of other sizes, please contact Technical Support.