LBTEK's 65 tabletop 13 mm linear stepper actuator translation stage is divided into two drive types: left-side drive and right-side drive. It comes with a stepper actuator, a travel range of 13 mm, and a minimum step size of 2μm. The stage tabletop size is 65 mm×65 mm and features M6 threaded holes. The bottom of the stage is equipped with four U-shaped groove positioning holes, allowing the stage to be secured in place using M6 screws.

The SMET-13x series actuators provided by LBTEK feature a sleek and compact design, with a fully retracted length of 74.6 mm, delivering smooth and precise linear motion control. These actuators are driven by a miniature two-phase bipolar stepper motor, achieving a maximum stepping speed of 2 mm/s. The elimination of the rotary contact structure and the non-rotating top ball head reduce wear and friction, enhancing motion smoothness. When the actuator is not powered, manual adjustment can be performed using the red hand-turning knob located at the rear. This series of actuators offers two mounting options: M6×0.25 threads and an Ø8.6 mm smooth-wall configuration.

Note: The electric actuator does not support hot-plugging, as it may damage the motor. Additionally, rotating the hand-turning knob while the actuator is powered may cause damage to the motor.

The EAC-CV2-1 electric actuator controller provided by LBTEK is a structurally very compact single-axis, two-phase stepper motor controller, primarily used to control the operation of the SMET series electric actuators. It allows selection between trapezoidal and S-shaped speed profiles and features a high theoretical microstepping resolution (49,152 microsteps for motors with 24 full steps and 409,600 microsteps for motors with 200 full steps). The top of the controller is equipped with a digital display and three control buttons, facilitating simple manual operation of the electric actuator. The brightness of the digital display is adjustable and can also be turned off. On the end face of the controller, there are two bidirectional trigger ports with SMA connectors, which can be used to read 5 V external logic signals or output 5 V logic signals to control external devices. Each port can be individually configured.

Note: The electric actuator controller does not support hot-plugging. To disconnect the electric actuator from the controller, please power off the controller first before disconnecting the actuator.

The LBTEK-provided 65mm travel stage actuator-driven bracket assembly is made of aluminum alloy, featuring high precision and good rigidity, used to secure the actuator onto a 65mm travel stage.

The single-axis linear translation stage from LBTEK is available in three drive types: end direct drive, left-side drive, and right-side drive. All types feature single-axis drive with a micrometer driver, providing 13 mm travel and 10 μm minimum graduation. The stage surface measures 65 mm × 65 mm with M6 tapped holes. The stage base incorporates four U-shaped slot positioning holes for securing the stage via M6 screws.

The XY-axis linear translation stage from LBTEK is available in three drive types: end direct drive, left-side drive, and right-side drive. All types feature XY-axis drive with a micrometer driver, providing 13 mm travel and 10 μm minimum graduation. The stage surface measures 65 mm × 65 mm with M6 tapped holes. The stage base incorporates four U-shaped slot positioning holes for securing the stage via M6 screws.

The XYZ-axis linear translation stage from LBTEK is available in three drive types: end direct drive, left-side drive, and right-side drive. All types feature XYZ-axis drive with a micrometer driver, providing 13 mm travel and 10 μm minimum graduation. The stage surface measures 65 mm × 65 mm with M6 tapped holes. The stage base incorporates four U-shaped slot positioning holes for securing the stage via M6 screws.