The LBTEK Removable Knobs can be used with MT series M6×0.25 mm adjusters with side holes (such as MT-AM1S2, MT-AM1S6) to enable manual adjustment of the mount by users. When the knob is screwed into the adjuster, the 2 mm hex socket of the adjuster remains accessible. Additionally, the removable knob is compatible with other M6×0.25 mm adjusters. Please note that adding the knob may reduce the adjuster's range of motion, potentially decreasing the mount's adjustable angle. Note: To avoid cross-threading the removable knob, first place it against the adjuster and rotate until slight resistance is felt, then screw the knob into the adjuster.

LBTEK M6×0.25 mm Locknut, suitable for all adjustment mounts with M6×0.25 mm adjusters, providing long-term stability for the mount and resistance to impact and vibration. With flexible usage scenarios, for applications requiring frequent adjuster tuning, simply hand-tighten the locknut (torque approximately 0.03-0.06 N·m). For long-term stability, use the MT-TW13 torque wrench to tighten, achieving a torque of up to 0.23 N·m. Note: To avoid cross-threading the locknut, place it against the adjuster, rotate the locknut until slight resistance is felt, then thread the locknut onto the adjuster.

LBTEK provides Hex-Key Adjustment Thumb Screws that allow quick adjustment of hex actuators, cap screws, and set screws. Unlike balldriver, they can remain in the hex socket of the screw during adjustment, enhancing convenience. Each size is sold in a set of four thumb screws. Additionally, a kit containing one of each size is also available.