LBTEK-0.5-inch vertically adjustable high-stability mirror mount

Product Description

Heat-treated 316L Stainless Steel material, low Coefficient of Thermal Expansion
440C Stainless Steel balls and Sapphire Pads, wear-resistant and with a low friction coefficient
Adjusters adjustment method, vertical adjustment
Optical Components with a Mounted Diameter of 12.7 mm

LBTEK 0.5-inch Vertical-Adjustment High-Stability Mirror Mount is used to mount Optical Components with a Mounted Diameter of 12.7 mm and supports Left- and Right-Handed Configurations. Compared with standard optical mounts, it offers long-term Alignment Stability advantages. Optical Components are secured with Flexure Springs + fixing screws; this fixing method can generate greater clamping force and higher beam Pointing Stability while facilitating quick assembly and disassembly of Optical Components. The M4×0.2 Precision Adjuster can provide the mount with an Angular Adjustment Range of ±4°; the adjustment mode is vertical adjustment, and 2-axis Adjusters are optional for vertical adjustment. Each Adjuster is equipped with a locking mechanism to ensure long-term Stability of the mount after angle adjustment.

Attributes

Surface treatmentSandblasting

Regulator adjustment methodVertical adjustment

Regulator SpecificationsM4×0.2

Pitch/Yaw Angle±4°

Lock Ring Wrench of Vertical Adjustment Mount

Combined design of dual wrench heads
Center-through hole, 2 mm hex keys can pass through the wrench
Locking ring and thread pair can be adjusted simultaneously

The MT-OWR1 Lock Ring Wrench provided by LBTEK is specifically designed for adjusting the lock rings of MT-AM1S5 stainless steel mirror mounts. It features a dual-wrench-head design, allowing the lock ring adjustment and the threaded pair to be aligned in the same line. The Ø3 mm through-hole at the center of the wrench head enables a 2 mm hex key to pass through the wrench, facilitating simultaneous adjustment of the threaded pair while adjusting the lock ring.

Lock Ring Wrench Adjusting MT-AM1S5 the Lock Ring of the Stainless Steel Mirror Mount

	Product Model	Applicable Products	File	Unit Price	Compare	Lead Time
	MT-OWR1	MT-AM1S5		$51.12		today	Add Cart
	MT-OWR05	MT-AM05S5		$45.64		today	Add Cart

0.5-inch stainless steel mirror frame, 2 vertical drive adjusters

For mounting Optical Components with a mounted diameter of 12.7 mm
2 precision adjusters with lock ring without knob
Adjustable angle ±4°
Adjustment accuracy: 0.65°/rev
Optical Components secured by flexible clips and fixing screws

LBTEK 0.5-inch stainless steel mirror mount, equipped with two vertical drive adjusters with locking rings, for mounting 12.7 mm Optical Components. Suitable for situations where space behind the mount is limited and horizontal adjusters cannot be used. The Optical Components are locked by flexible spring tabs and set screws. Two knobless M4×0.20 precision adjusters (with locking rings) provide ±4° angular adjustment and are operated with a hex wrench.
The MT-AM05S5 mounting holes are two M4 countersunk holes; the MT-AM05S5A has one M4 threaded hole and one M4 countersunk hole. The front and rear plate connecting block of the MT-AM05S5A is made of 316L stainless steel (the MT-AM05S5 is made of copper), which provides better corrosion resistance and outgassing characteristics, and the adjustment feel is more convenient for fine adjustments. The adjuster ends have a stop structure to prevent the locking rings from being unscrewed and falling off.

0.5-inch stainless steel mirror mount used with stainless steel post and gapless pressure block

	Product Model	Applicable optical element diameter	Optical axis center height	Adjuster specifications/quantity	height	File	Unit Price	Compare	Lead Time
	MT-AM05S5A New	Ø12.7 mm	12.7 mm	Anti-drop lock ring M4×0.2 precision adjuster/2 pcs	34.1 mm（Centered position）		$185.16		today	Add Cart
	MT-AM05S5	Ø12.7 mm	12.7 mm	M4×0.2 Precision Adjuster with Locking Ring / 2 pcs	30.7 mm（centered position）		$186.53		today	Add Cart