LBTEK-2-inch Vertical-Adjustment High-Stability Mirror Mount

Product Description

Heat-treated 316L Stainless Steel material, with a small Coefficient of Thermal Expansion
440C Stainless Steel Ball and Sapphire Pads, wear-resistant and with a low friction coefficient
Adjusters adjustment method, vertical adjustment
Optical Components with a Mounted Diameter of 50.8 mm

LBTEK 2-Inch Vertical-Adjustment High-Stability Mirror Mount is used to mount Optical Components with a Diameter of 50.8 mm and can be installed in Left- and Right-Handed Configurations. Compared with standard optical mounts, it offers long-term Alignment Stability advantages. Optical Components are secured by Flexure Springs + fixing screws; this fixing method can generate greater clamping force and higher beam Pointing Stability while facilitating quick assembly and disassembly of Optical Components. The M6×0.25 Precision Adjuster provides the mount with an Angular Adjustment Range of ±4°. The adjustment mode is vertical adjustment, and 2-axis Adjusters are available for vertical adjustment. Each Adjuster is equipped with a locking mechanism to ensure long-term Stability of the mount after angular adjustment.

Attributes

Surface treatmentsandblasting

Regulator adjustment methodvertical adjustment

Regulator SpecificationsM6×0.25

Pitch/Yaw Angle±4°

Lock Ring Wrench of Vertical Adjustment Mount

Combined design of dual wrench heads
Center-through hole, 2 mm hex keys can pass through the wrench
Locking ring and thread pair can be adjusted simultaneously

The MT-OWR1 Lock Ring Wrench provided by LBTEK is specifically designed for adjusting the lock rings of MT-AM1S5 stainless steel mirror mounts. It features a dual-wrench-head design, allowing the lock ring adjustment and the threaded pair to be aligned in the same line. The Ø3 mm through-hole at the center of the wrench head enables a 2 mm hex key to pass through the wrench, facilitating simultaneous adjustment of the threaded pair while adjusting the lock ring.

Lock Ring Wrench Adjusting MT-AM1S5 the Lock Ring of the Stainless Steel Mirror Mount

	Product Model	Applicable Products	File	Unit Price	Compare	Lead Time
	MT-OWR1	MT-AM1S5		$51.12		today	Add Cart
	MT-OWR05	MT-AM05S5		$45.64		today	Add Cart

2-inch Stainless Steel Mirror Mounts, 2 Vertical Drive Adjusters

For mounting optical components with a diameter of 50.8 mm
2 precision adjusters with lock rings (knobless)
Adjustable angle: ±4°
Adjustment precision: 0.27°/rev
Optical component secured by flexure pieces and set screws

LBTEK 2-inch Stainless Steel Mirror Mounts, with 2 lock rings and vertical drive adjusters, designed for mounting optical components with a diameter of 50.8 mm, suitable for situations where there is no space behind the mount to use horizontal adjusters. The optical component is secured using flexure pieces and set screws. The two M6×0.25 precision adjusters with lock rings (knobless) provide an angular adjustment range of ±4° for the mount. The knobless adjusters are adjusted using a hex key. Additionally, the optical adjustment mount features M4 countersunk mounting holes on the side. The purchase includes 2 M4 thin-head hex socket screws and one each of 2.0 mm and 2.5 mm hex keys.

Stainless steel mirror mount can be used with stainless steel posts and the non-bridging clamping arm.

	Product Model	Applicable optical element diameter	Optical axis center height	Adjuster specifications/quantity	File	Unit Price	Compare	Lead Time
	MT-AM2S5	Ø50.8 mm	35.6 mm	Locking ring without knob M6×0.25 precision adjuster/2 pcs		$526.00		5 weeks	Add Cart