The LBTEK Benchtop Fiber Endface Inspection Microscope is equipped with a high-definition, high-resolution TFT display, capable of producing high-quality, low-distortion imaging of fiber endfaces and their surroundings. This microscope features a high-intensity illumination system and 200X/400X magnification, sufficient to provide clear images of both the fiber core and surrounding cladding. The LBTEK benchtop fiber endface inspection microscope offers two types of ferrule adapters: Ø2.5 mm and Ø1.25 mm. The Ø2.5 mm ferrule adapter is suitable for FC and SC fiber jumpers, while the Ø1.25 mm ferrule adapter is designed for LC fibers. Note: The fiber endface inspection microscope must not be used to inspect fibers connected to active light sources. For operating instructions, please refer to the electronic manual under details.

LBTEK fiber optic connector adapter is compatible with various fiber optic patch cords, enabling multiple types of connectors to be tested through the fiber endface inspection microscope system. Among them, the WLT-125P is suitable for Ø1.25 mm ferrule LC connectors, the WLT-250P is suitable for Ø2.5 mm ferrule FC/PC, SC, and ST connectors, the WLT-FCA is suitable for Ø2.50 mm ferrule FC/APC connectors, the WLT-MTAPC is suitable for ferrule MT/APC connectors, the WLT-MTUPC is suitable for ferrule MT connectors, and the WLT-SMA is suitable for ferrule SMA connectors. For installation of other specifications of fiber optic connectors, please contact Technical Support for customization.