The MT-OWR1 Lock Ring Wrench provided by LBTEK is specifically designed for adjusting the lock rings of MT-AM1S5 stainless steel mirror mounts. It features a dual-wrench-head design, allowing the lock ring adjustment and the threaded pair to be aligned in the same line. The Ø3 mm through-hole at the center of the wrench head enables a 2 mm hex key to pass through the wrench, facilitating simultaneous adjustment of the threaded pair while adjusting the lock ring.

The LBTEK Side Hole Adjuster features a high-precision Ø1.7 mm tip for adjusting MT-series mirror mounts with threaded side holes. The handle end is equipped with a 2.0 mm hex head, allowing it to function as a 2.0 mm hex key. The central nut is compatible with a 6.0 mm key, forming an extended leverage arm. With a total length of 36.1 mm, it enables 360° adjustment of threaded side-hole components for optical mounts with diameters of 25.4 mm or larger, without interfering with other threaded components on the back of the mount. The side-hole adjuster is made of weakly magnetic stainless steel, facilitating retrieval with a magnet in confined spaces.

LBTEK M6×0.25 mm Locknut, suitable for all adjustment mounts with M6×0.25 mm adjusters, providing long-term stability for the mount and resistance to impact and vibration. With flexible usage scenarios, for applications requiring frequent adjuster tuning, simply hand-tighten the locknut (torque approximately 0.03-0.06 N·m). For long-term stability, use the MT-TW13 torque wrench to tighten, achieving a torque of up to 0.23 N·m. Note: To avoid cross-threading the locknut, place it against the adjuster, rotate the locknut until slight resistance is felt, then thread the locknut onto the adjuster.

The LBTEK Removable Knobs can be used with MT series M6×0.25 mm adjusters with side holes (such as MT-AM1S2, MT-AM1S6) to enable manual adjustment of the mount by users. When the knob is screwed into the adjuster, the 2 mm hex socket of the adjuster remains accessible. Additionally, the removable knob is compatible with other M6×0.25 mm adjusters. Please note that adding the knob may reduce the adjuster's range of motion, potentially decreasing the mount's adjustable angle. Note: To avoid cross-threading the removable knob, first place it against the adjuster and rotate until slight resistance is felt, then screw the knob into the adjuster.

The LBTEK Torque Wrench MT-TW13 features a preset torque value of 0.23 N•m and is compatible with 13 mm hex nuts, allowing it to secure the MT-LN1 locknut onto MT series adjustment mounts with M6×0.25 mm adjusters. The MT-TW6 has a preset torque value of 0.17 N•m and can adjust the 6 mm hex locknut on the threaded pair of the high-stability mount MT-AM05S2. The wrenches are engraved with the preset torque value, torque direction, wrench size, and model for user identification. Featuring a bending design, the pivot joint bends and disengages when the preset torque is reached, preventing excessive force from being applied to the locknut, which could damage the adjuster's threads. Note: This wrench is not suitable for adjusters that require frequent adjustments, as these applications typically require lower torque (approximately 0.03 to 0.06 N·m).