LBTEK Ø12.7 mm Stainless Steel Vertical Adjustment Mirror Mount (Industrial Grade), with a main body made of stainless steel, features a stable and compact design. It can accommodate optical elements with a minimum thickness of 1.5 mm and a diameter of 12.7 mm, secured by rubber-tipped screws. The VAM-05F model allows front-side mounting of optical components, while the VAM-05B enables back-side mounting, ensuring that the front surface of the optical element remains at the same mounting position regardless of its thickness. Both mounts offer an adjustment range of ±2.5°, with adjustment precision for pitch/yaw at 0.52°/rotation and 0.46°/rotation, respectively. Equipped with two M3.5×0.25 threaded pairs featuring locking copper plates, adjustments can be made using the included HWS-1.5 knurled 1.5 mm hex key or a standard 1.5 mm hex key. Both adjusters are marked with their respective motion axes: "P" for pitch and "Y" for yaw. The base includes three Ø4.3 mm through-holes, allowing the mount to be installed on a post using the included M4 socket head hex screws. Additionally, the back of the base features extra Ø2 mm location pin holes for securing the position.

LBTEK Ø30 mm Stainless Steel Vertical Adjustment Mirror Mount (Industrial Grade), with a main body made of stainless steel, features a stable and compact design. It can accommodate optical elements with a minimum thickness of 3 mm and a diameter of 30 mm, secured by rubber-tipped screws. The adjustment range is ±2.5°, with adjustment precision for pitch/yaw at 0.3°/rotation and 0.21°/rotation, respectively. It includes 2 M4×0.25 threaded pairs with locking copper plates, adjustable using the included HWS-2 knurled 2 mm hex key or a standard 2 mm hex key. Both adjusters are marked with their motion axes: P for pitch and Y for yaw. The base is equipped with 3 Ø4.4 mm through-holes, allowing the mount to be mounted on posts using the included M4 socket head cap screws. Additionally, the back of the base features extra Ø2 mm location pin holes for securing the position.

LBTEK Ø25.4 mm Stainless Steel Vertical Adjustment Mirror Mount (Industrial Grade), with a main body made of 316L stainless steel, features a stable and compact design capable of mounting Ø25.4 mm optical components. - VAM-1BF: Front-mounted for optical components with a minimum thickness of 3 mm, secured by rubber-tipped screws. - VAM-1BP: Front-mounted for optical components with a minimum thickness of 3 mm, secured by both rubber-tipped screws and a clamping plate. - VAM-1BB: Rear-mounted for optical components with a minimum thickness of 3 mm, secured by rubber-tipped screws. - VAM-1AF2: Back-mounted for optical components with a maximum thickness of 3.8 mm, secured by a retaining ring. Rear-mounted adjustment mounts ensure that the front surface of the optical component remains at the same mounting position regardless of its thickness. The adjustment range is ±3.0°, with adjustment precision for pitch/yaw at 0.28°/rev and 0.24°/rev, respectively. Two M4×0.25 threaded pairs with locking copper plates are included, adjustable using the provided HWS-1.5 knurled hex key (1.5 mm) or a standard 1.5 mm hex key. The base features three M4 through-holes for mounting and includes supplied M4 socket head cap screws for attaching the mount to posts. Additionally, a Ø2 mm location pin hole on the base's back ensures precise positioning.