LBTEK-Your Trusted Partner For Optoelectronic Experiments!

Product Description

Directly applicable in a vacuum environment of 10^(-6) Torr (approximately 10^-4 Pa) at 23°C
After baking at 110°C for 5 hours, suitable for vacuum environments of 10^(-9) Torr (approximately 10^-7 Pa) at 23°C
Features low thermal drift and thermal displacement
Made of heat-treated 316L stainless steel with low expansion coefficient
Utilizes 440C stainless steel ball and sapphire seat, wear-resistant with low friction coefficient
Optical components secured via retaining ring and flexure spring plate

The LBTEK 1-inch vacuum series optical mount is designed for mounting optical components with a diameter of 25.4 mm and can be installed in either left-handed or right-handed configurations. The optical component is secured using flexure spring plate and fixing screws, or alternatively with a retaining ring. The M6×0.25 precision adjuster provides the mount with an angular adjustment range of ±4°. The VSS series features a unique vacuum structural design. At an ambient temperature of 23°C, it can be directly used in a vacuum environment of 10^(-6) Torr right after unpacking. For applications in vacuum environments ranging from 10^(-6) Torr to 10^(-9) Torr, it is recommended to bake the product at 110°C for 5 hours before installation to remove any attached grease or moisture. Note: All VSS products are pre-baked before leaving the factory, which may result in varying degrees of light yellow discoloration. This appearance is normal and does not affect performance in vacuum environment. Avoid contact with greasy or moist objects when using this series of products.

Attribute

MaterialStainless Steel (316L)

Surface treatmentSandblasting

Regulator SpecificationsM6×0.25

Compatible ApplicationsVacuum environment

1-inch vacuum-compatible stainless steel mirror mount with 3 adjusters

Adjustable angle range ±4°
For mounting optical components with 25.4 mm diameter
3 M6×0.25 precision adjusters
Adjustment sensitivity: 0.4°/revolution
Two optical component mounting options available

LBTEK 1-inch stainless steel lens mount for mounting 25.4 mm diameter optical components, equipped with three knobless M6×0.25 precision adjusters. Two low-deformation optical component fixation methods are available: VSS-MT-AM1S4 uses flexible spring plates and fixing screws to secure the optical component, with a minimum component thickness of 2 mm; VSS-MT-AM1T2 employs retaining rings to directly fix the optical component, and two stainless steel retaining rings are included with the purchase of the mount. The maximum thickness for ring-fixed optical components is 8 mm. The three knobless M6×0.25 precision adjusters allow for pitch and yaw adjustment of the optical component using a hex key. The optical mount features M4 countersunk mounting holes on the side. Purchasing the LBTEK stainless steel lens mount includes vacuum hex ultra-thin head screws (with vent holes) and a hex key.

1-inch vacuum lens mount used in conjunction with vacuum connecting rods and vacuum gap-free clamping blocks

	Product Model	Optical component mounting method	Adjuster specifications/quantity	Unit Price	Compare	Lead Time
	VSS-MT-AM1T2	Snap ring fixation	Knobless M6×0.25 Precision Adjuster / 3 pcs	$250.89		8 weeks
	VSS-MT-AM1S4	Flexible spring clip fixation	Knobless M6×0.25 Precision Adjuster / 3 pcs	$156.76		8 weeks

1-inch vacuum-compatible stainless steel optical mount