LBTEK-Your Trusted Partner For Optoelectronic Experiments!

Product Description

Directly applicable in a vacuum environment of 10^(-6) Torr (approximately 10^-4 Pa) at 23°C
After baking at 110°C for 5 hours, suitable for vacuum environments of 10^(-9) Torr (approximately 10^-7 Pa) at 23°C
Features low thermal drift and thermal displacement
Made of heat-treated 316L stainless steel material with low expansion coefficient
Utilizes 440C stainless steel ball and sapphire seat, wear-resistant with low friction coefficient
Optical components are secured using retaining rings and flexure spring plates

The LBTEK 2-inch vacuum series optical mounts are designed for mounting optical components with a diameter of 50.8 mm and can be installed in either left- or right-handed configurations. The optical components are secured using flexure spring plate and fixing screws, or alternatively with retaining rings. The M6×0.25 precision adjusters provide the mount with an angular adjustment range of ±4°. The VSS series features a unique vacuum structural design, allowing it to be directly used in a 10^(-6) Torr vacuum environment at 23℃ after unpacking. For applications in vacuum environments ranging from 10^(-6) Torr to 10^(-9) Torr, it is recommended to bake the product at 110℃ for 5 hours before use to remove any attached grease and moisture. Note: All VSS products are pre-baked before leaving the factory, which may result in varying degrees of light yellow discoloration. This appearance is normal and does not affect vacuum performance. Avoid contact with greasy or moist objects when using this series of products.

Attribute

MaterialStainless Steel (316L)

Surface treatmentSandblasting

Regulator SpecificationsM6×0.25

Compatible ApplicationsVacuum environment

2-inch vacuum-compatible stainless steel mirror mount with 3 adjusters

Adjustment sensitivity: 0.27°\/revolution
For mounting optical components with 50.8 mm diameter
3 M6×0.25 precision adjusters
Adjustable angle range±4°
Two optical component mounting options available

LBTEK 2-inch Vacuum Stainless Steel Lens Mount, compatible with Ø50.8 mm optical components. Two low-deformation mounting options available: VSS-MT-AM2 uses flexible spring plates and set screws for fixation, with a minimum optical component thickness of 4 mm; VSS-MT-AM2T employs a retaining ring for direct fixation, and one stainless steel retaining ring is included with the mount purchase. The maximum thickness for ring-fixed optical components should not exceed 12 mm. Features three M6×0.25 precision adjusters with knobs, allowing adjustment of optical component pitch and yaw via hex key or knobs. The optical mount has M4 countersunk mounting holes on the side. Purchase of LBTEK stainless steel lens mount includes vacuum hex screws (with vent holes) and a hex key.

The 2-inch vacuum lens mount can be used with vacuum rods and vacuum gapless clamping blocks

	Product Model	Optical component mounting method	Adjuster specifications/quantity	Unit Price	Compare	Lead Time
	VSS-MT-AM2T	Snap ring fixation	Knurled knob M6×0.25 precision adjuster/3 pcs	$299.01		8 weeks
	VSS-MT-AM2	Flexible spring clip fixation	Knurled knob M6×0.25 precision adjuster/3 pcs	$293.64		8 weeks

2-inch vacuum-compatible stainless steel optical mount