The LBTEK Type A Standard O-Type Dual-axis Optical Mount features an internal threaded through-hole and secures optical components using two retaining rings. The base of the mount is equipped with two M4 countersunk holes for connecting to optical posts. The AMMM-1A has a short production cycle, meeting requirements for rapid bulk delivery, and its four tension springs provide enhanced stability.

The LBTEK Type B Standard O-type Mount features smooth bores without threads and uses set screws to secure optical components. The AMM-1B and AMM-2B mounts are equipped with 2 M4 countersunk holes at the base, while the AMM-05B has 2 M4 through-holes for connecting to optical posts. The AMM-05B uses M4 threaded holes for post connection, whereas the AMM-05B-SP has Ø4.2 mm smooth bore holes, allowing easier control of the mount's orientation after tightening when the mounted component cannot rotate. LBTEK also supports customization of O-type mounts for large-diameter optical components ranging from 3 inches to 8 inches in this series. For details, please contact technical support. The AMMM-1B has a short production cycle, meeting requirements for rapid bulk delivery, and its four tension springs provide enhanced stability.

The LBTEK AMMC Series Standard O-Type Mount, with a smooth bore, secures optical components with set screws. The base of the mount is equipped with two M4 threaded holes for connecting to optical posts. The surface centerline aligns with the center of the post' mounting hole, simplifying the beam alignment process.