The M1×3 cross pan head screws (CPSM1-1) from LBTEK are supplied in boxes of 50 units, primarily designed for use with LBMS15 series piezoelectric linear translation stages.

The spring-loaded 5 mm hex thumb screws from LBTEK are manufactured from 7075-T6 aluminum, the highest strength grade among common aluminum materials, delivering nearly twice the torsional performance of 6061-T6 aluminum. The front POM plunger effectively prevents post scratching. Knurled thumb screws enable initial hand tightening for positional adjustment. After positioning, a 5 mm hex key reinforces the clamping force (Note: Excessive torque may cause the locking screw to fracture. It is recommended to use an L-shaped hex key gripped at the short end for gentle tightening, with a maximum recommended torque of 3.2 N·m).

The SSDH series double-ended socket set screws from LBTEK are available in three specifications: M3×5.5 mm, M4×11.5 mm, and M6×15.5 mm, each featuring double-ended socket screws on both ends. Packaged 50 units per box with included the hex key, these screws can be extracted from post ends using the provided tools. Note: The reduced engagement depth (0.5 mm shorter than standard cup-point set screws) ensures compatibility with M3×6 mm, M4×12 mm, and M6×16 mm cup-point screws while maintaining interchangeability.